Loading the Washer Adding Cleaning Products Control Panel Wash Cycles Cycle Modifiers Special Care Features Options and Extra Functions 31 SMART FUNCTIONS LG ThinQ Application Smart Diagnosis Function 35 MAINTENANCE Regular Cleaning Periodic Maintenance Care in Cold Climates 40 TROUBLESHOOTING...
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE Safety Messages Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages.
Page 4
• Use this appliance only for its intended purpose. • If the product has been submerged in water, sitting in standing water, or waterlogged, do not come in contact with the product and immediately contact an LG Electronics customer information center for instructions before resuming use.
Page 5
IMPORTANT SAFETY INSTRUCTIONS • Keep the area underneath and around your appliances free of combustible materials (lint, paper, rags, etc.), gasoline, chemicals and other flammable vapors and liquids. • Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
IMPORTANT SAFETY INSTRUCTIONS CAUTION STATEMENTS CAUTION • To reduce the risk of minor or moderate injury to persons, malfunction, or damage to the product or property when using this product, follow basic precautions, including the following: Installation • Install the product on a firm and level floor. Operation •...
• For your safety and for extended product life, use only authorized components. The manufacturer is not responsible for product malfunction, property damage or bodily injury caused by the use of separately purchased unauthorized components, parts, or non-LG products. Front View...
Page 8
PRODUCT OVERVIEW Accessories Required Accessories Included Accessories Tie Strap Hot and Cold Water Hoses Product Specifications The appearance and specifications listed in this manual may vary due to constant product improvements. Model WT7305C* Electrical Requirements 120 VAC @ 60 Hz Min.
INSTALLATION INSTALLATION Before Installing WARNING • Moving or installation of the appliance requires two or more people. Failure to follow these instructions may result in injury. • Store and install the appliance where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions.
10 INSTALLATION Connecting to the Power Supply Final Installation Check Tools Needed Pliers Flat-Blade Screwdriver Level Choosing the Proper • The washer must be installed on firm flooring to minimize vibration during the spin cycle. Location Concrete flooring is best, but a wood floor is sufficient, provided it is built to FHA standards.
• Do not reuse old hoses. Use only new hoses when installing the washer. Old hoses could leak or burst causing flooding and property damage. Contact an LG Customer Information Center for assistance in buying hoses. Remove the foam tub insert.
12 INSTALLATION • Connect the blue hose to the cold water NOTE faucet and the red hose to the hot water faucet. • Do not stretch the water hoses intentionally, and make sure that they are not pinched, crushed or kinked by other objects.
INSTALLATION hose can result in flooding and property NOTE damage. • If the drain is large enough for the flange on the hose to fit inside, then do not insert the flange NOTE more than 1 - 2 inches into the drain. •...
14 INSTALLATION How to Level the Washer the top of the lid. Using these surfaces will result in the washer being unlevel. Position the washer in its final location. • Take special care not to pinch, strain, or crush the water and drain hoses. If you have a carpenter’s level , you can use it to check that the washer is level.
Page 15
INSTALLATION • Connect this appliance to a grounded outlet Press the Start/Pause button. conforming to the rating prior to use. Failure to • The test will run for about 3 minutes. do so may result in fire, electric shock, or •...
16 OPERATION OPERATION Before Use Adjust settings. • Default settings for the selected cycle can be changed, if desired, using the cycle WARNING modifier and option buttons. • To reduce the risk of fire, electric shock, or injury • Not all modifiers and options are available to persons, read the SAFETY INSTRUCTIONS on all cycles.
OPERATION Sorting Laundry example, lint collector - knit sweater; lint producer - terry cloth towels.) CAUTION How to Sort Laundry • The washer can be fully loaded, but the tub should not be tightly packed with items. The lid By Colors By Soil By Fabric By Lint...
18 OPERATION Loading the Washer Bulky Items • Do not wash entire pillows or cushions. Remove General Tips pillow or cushion inserts and wash the covers only. • Check and empty pockets. Paper clips, coins, • Use the Bedding cycle for large or bulky items matches, and other items can damage clothing such as poly-filled jackets, comforters, pillows, and the washer.
OPERATION • To reduce tangling, load items loosely in even • Never use more than the maximum amount of piles surrounding the agitator. detergent recommended by the manufacturer. Using too much detergent can lead to oversudsing, poor rinsing, detergent buildup in clothing, and residue buildup that can contribute to odors in the washer.
Page 20
20 OPERATION • The detergent is added to the load at the NOTE beginning of the cycle. Always use HE (High- Efficiency) detergent with your washer. • Follow the manufacturer’s recommendations when adding cleaning products. • Do not exceed the maximum fill line. Using too much detergent can result in detergent buildup in clothing and the washer.
OPERATION cause the bleach to be dispensed immediately. automatically diluted and dispensed at the proper Using too much bleach can damage fabrics. time in the wash cycle. • Never pour undiluted liquid chlorine bleach • The dispenser is activated twice to ensure directly onto the load or into the tub.
Page 22
22 OPERATION NOTE • If there is any water remaining in the drum after the washer shuts off, it will drain after a delay. The washer can be restarted at any time before the drain begins. However, once the water begins to drain, all functions will be suspended until the water has been completely drained and the washer shuts off.
Page 23
OPERATION Cycle Status Indicators • These LEDs will blink when a cycle is selected to indicate which stages will run. • When a cycle is running, the LED for the active stage will blink, and the LEDs for the remaining stages will remain steady.
24 OPERATION Wash Cycles The wash cycles are designed for specific types of wash loads. Select the cycle that best matches the load contents for maximum wash performance and fabric care. See the Sorting Laundry section for best results, and follow the fabric care labels on your garments. For a guide to fabric care symbols, see the Sorting Laundry section.
Page 25
OPERATION Cycle Waterproof Description Suitable for washing waterproof items such as water resistant clothing, mattress covers, outdoor clothes, and plastic mats. (less than 14 lb) NOTE • Do not use any other wash cycle to wash waterproof items. • Do not use this cycle to wash a mixed load of waterproof and non-waterproof items.
Page 26
• The default cycle is Small Load, used for normally soiled loads with a few items. This cycle is also available for download. • Refer to the LG ThinQ application to see the cycles available for download. Wash Temp. Default: Warm...
OPERATION Cycle Modifiers • Press the Spin button repeatedly until the desired speed is selected. • Some fabrics, such as delicates, require a slower About Modifier Buttons spin speed. To protect your clothing, not all spin Each cycle has default settings that are selected speeds are available for all cycles.
28 OPERATION NOTE NOTE • Best results are obtained with smaller loads (less • This washer is equipped with a special drain than 6 lb.) feature that is designed to make your washer as safe as possible. If the washer is paused or shut off while there is still water in the tub, the water will drain automatically after several minutes of Speed Wash...
Page 29
OPERATION Press and hold the Spin button for 3 seconds. • To add water during a cycle, pause the cycle before selecting Deep Fill or Max. • You can change the spin speed by pressing the Spin button. • If the washer has already reached its maximum fill level, pressing Deep Fill or Max.
Page 30
30 OPERATION Control Lock Use this function to disable the controls. This function can prevent children from changing cycles or operating this washer. NOTE • The function does not lock the door. • Once this function is set, all buttons are locked except the Power button.
Internet service provider or refer to your • Push Alerts wireless router manual. - When the cycle is complete or the appliance • LG ThinQ is not responsible for any network has problems, you will receive a push connection problems or any faults, malfunctions, message.
Page 32
This equipment generates, uses, and can radiate radio frequency energy and, if not Start a cycle from the LG ThinQ application on installed and used in accordance with the your smartphone. instructions, may cause harmful interference to...
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost FCC RF Radiation Exposure of performing such distribution (such as the cost of...
Page 34
If you experience a problem with your Wi-Fi equipped appliance, it can transmit troubleshooting data to a smartphone using the LG ThinQ application. • Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions provided in the LG ThinQ application.
MAINTENANCE MAINTENANCE WARNING • To reduce the risk of fire, electric shock, or injury to persons, read this entire owner’s manual, including the SAFETY INSTRUCTIONS, before operating this appliance. • Unplug the appliance before cleaning to avoid the risk of electric shock. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
Page 36
36 MAINTENANCE • Mineral scale and other spots may be removed Cleaner Instructions from the stainless steel tub using a soft cloth soaked in stainless steel cleaner. Powdered cleaner Follow manufacturer’s recommendations. • Do not use steel wool or abrasive cleaners. Cleaning tablets Place directly into the washer tub.
Page 37
MAINTENANCE Cleaning the Water Inlet Filters Clean the inserts and drawer with warm water. If the washer does not fill properly, an error • Use a soft cloth or brush to clean and message will appear on the display. The inlet valve remove any residue.
38 MAINTENANCE Flush then reattach the water hoses. Turn on the washer and select the Spin cycle. • Before reattaching the water inlet hoses, flush them by running several gallons of Press the Start/Pause button to start the water through them into a bucket or drain, drain pump for 1 minute.
Page 39
MAINTENANCE Press the Power button to turn on the washer. Press and hold the Spin button for 3 seconds to operate Spin Only cycle for draining and spinning. Press the Start/Pause button and check that the water fills properly. When the Drain Hose is Frozen Pour hot water in the washer tub and close the lid.
40 TROUBLESHOOTING TROUBLESHOOTING The washer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the washer does not function properly or does not function at all, check the following before you call for service. Before Calling for Service Error Messages Problem...
Page 41
TROUBLESHOOTING Problem Possible Cause & Solution Special drain feature • If the washer is paused during a cycle for more than 4 minutes, the cycle will be canceled DRAIN FEATURE and any water remaining in the tub will be drained. •...
Page 42
42 TROUBLESHOOTING Noises Problem Possible Cause & Solution Clicking Lid lock sounds when the lid locks or unlocks. • Normal operation Spraying or hissing Water spraying or circulating during the cycle • Normal operation Humming or Drain pump is pumping water from the washer at times during a cycle. Gurgling •...
Page 43
TROUBLESHOOTING Operation Problem Possible Cause & Solution Water Leaking Hoses are not connected correctly. • Check hoses and connectors for leaks, cracks, and splits. • Check and tighten hose connections. House drain pipes are clogged. • The washer pumps out water very rapidly. Check for water backing up out of the drain pipe during drain.
Page 44
44 TROUBLESHOOTING Problem Possible Cause & Solution Incomplete or no Detergent compartments clogged from incorrect filling. dispensing of • Make sure that detergent and additives are put into the correct dispenser compartments. detergent • For all detergent types, always make sure that the dispenser drawer is fully closed before the start of the cycle.
Page 45
TROUBLESHOOTING Problem Possible Cause & Solution Washer is not filling Filter is clogged. properly. • Make sure that inlet filters on the fill valves are not clogged. Refer to Cleaning the Water Inlet Filters in MAINTENANCE. Inlet hoses may be kinked. •...
Page 46
46 TROUBLESHOOTING Performance Problem Possible Cause & Solution Wrinkling Washer is not unloaded promptly. • Always remove items from the washer as soon as the cycle is complete. Washer is overloaded. • The washer can be fully loaded, but the tub should not be tightly packed with items. The lid of the washer should close easily.
Page 47
• Find the Wi-Fi network connected to your smartphone and remove it, then connect your not connected to the appliance on LG ThinQ. Wi-Fi network. Mobile data for your smartphone is turned on. • Turn off the Mobile data of your smartphone and connect the appliance using the Wi-Fi network.
Should your LG Washer (“Product”) fail due to a defect in materials or workmanship under normal and proper use, during the warranty period set forth below, LG will, at its option, repair or replace the Product. This limited warranty is valid only to the original retail purchaser of the Product (“You”) and applies only when purchased lawfully and used within the United States including U.S.
Page 49
Or by mail: LG Electronics, P.O. Box 240007, Huntsville, AL 35813 ATTN: Customer Service PROCEDURE FOR RESOLVING DISPUTES: ALL DISPUTES BETWEEN YOU AND LG ARISING OUT OF OR RELATING IN ANY WAY TO THIS LIMITED WARRANTY OR THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH BINDING ARBITRATION, AND NOT IN A COURT OF GENERAL JURISDICTION.
Page 50
Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LG at LG Electronics USA, Inc. Attn: Legal Department- Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632.
ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING DISPUTES” BELOW. Should your LG Washer ("Product") fail due to a defect in materials or workmanship under normal and proper use, during the warranty period set forth below, LG Electronics Canada, Inc. ("LGECI") will, at its option, repair, replace or pro rate the Product upon receipt of proof of the original retail purchase.
Page 52
(ASC), as determined by LG Canada. If your Product is located outside a 150 km radius from a ASC, as determined by LG Canada, it will be your responsibility to bring the Product, at your sole expense, to the ASC for in-warranty repair.
Page 53
If you and LG are unable to resolve the dispute within 30 days of LG’s receipt of the Notice of Dispute, the dispute shall be resolved by binding arbitration in accordance with the procedure set out herein.
Page 54
If you prevail in the arbitration, LG will pay your attorneys’ fees and expenses as long as they are reasonable, by considering factors including, but not limited to, the purchase amount and claim amount. Notwithstanding the foregoing, if applicable law allows for an award of reasonable attorneys’...
Page 56
LG Customer Information Center For inquiries or comments, visit www.lg.com or call: U.S.A. 1-800-243-0000 1-888-542-2623 CANADA Register your product Online! www.lg.com...