Table of Contents
Advertisement
DIR-615 Wireless N300 Router
User Manual
Figure 88. Configuring the local interface. The IPv6 tab. The Dynamic IPv6 Addresses section.
Parameter
Mode of dynamic IPv6
address assignment
Start IPv6
End IPv6
Lease Time
DNS relay
When all needed settings are configured, click the APPLY button.
Dynamic IPv6 Addresses
Select the needed value from the drop-down list.
Disable: Clients' IPv6 addresses are assigned manually.
•
Stateful: The built-in DHCPv6 server of the router allocates
•
addresses from the range specified in the Start IPv6 and
End IPv6 fields. Also when this value is selected, the
Static IP Addresses section is displayed on the tab.
Stateless: Clients themselves configure IPv6 addresses
•
using the prefix.
The start IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
The end IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
The lifetime of IPv6 addresses provided to clients. The field is
available for editing if the Static value is selected from the Mode
of local IPv6 address assignment list in the Local IPv6
Address section.
Move the switch to the right so that the devices connected to the
router obtain the address of the router as the DNS server address.
Move the switch to the left so that the devices connected to the
router obtain the address transmitted by the ISP or specified on the
Settings / Internet / DNS page as the DNS server address.
Page 102 of 176
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
