Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Monitor
  5. 2243QW - 22" - Monitor
  6. Quick start manual

Samsung 2243QW Quick Start Manual

2243qw 22" monitor 2243qw quick guide.
Hide thumbs

Advertisement

LCD MONITOR

quick start guide
2243QW/2243QWX


Advertisement

   Also See for Samsung 2243QW

Samsung 2043SWX - 5ms Widescreen LCD Monitor Manual Del Usuario
Samsung 2043SWX - 5ms Widescreen LCD Monitor Manual Del Usuario 583 pages
Samsung 2043SN User Manual
Samsung 2043SN User Manual 564 pages
Samsung SyncMaster 2043SWPLUS User Manual
Samsung SyncMaster 2043SWPLUS User Manual 194 pages

   Related Manuals for Samsung 2243QW

   Summary of Contents for Samsung 2243QW

  • Page 1: Lcd Monitor

    LCD MONITOR quick start guide 2243QW/2243QWX...

  • Page 2

    Introduction Package Contents Note Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Monitor & HAS stand Manuals Quick Setup Guide Cables D-Sub Cable USB Cable...

  • Page 3: Your Monitor

    Note Cleaning Cloth is only provided for highly polished black products as a product feature. Your Monitor Initial Settings Select the language using the up or down key. The displayed content will disappear after 40 seconds. Turn the Power button off and on. It will be displayed again. It can be displayed up to three (3) times.

  • Page 4

    Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the previous menu. Customized Key [ You can customize key assignment for the Custom button according to your preferences. Note You can configure the customized key for a required function via Setup > Customized Key.

  • Page 5

    POWER port Connect the power cord for your monitor to the POWER port on the back of the product. DOWN(USB downstream port) DOWN port of the USB monitor and a USB device with the Connect the USB cable. UP(USB upstrem port) UP port of the monitor and the USB port of the computer Connect the with the USB cable.

  • Page 6

    Introduction Cable holding ring • Fix the cables using the holding ring, as shown in the figure.

  • Page 7: Connecting Cables

    Connections Connecting Cables Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer. Using the D-sub (Analog) connector on the video card. •...

  • Page 8

    High speed Data Rate 480 Mbps Power Consump- 2.5 W tion (Max., each port) UP port of the monitor and the USB port of the computer with the USB Connect the cable. Note DOWN port, you have to connect the UP (Upstream Cable) to the PC. To use Make sure to use the USB cable supplied with this monitor to connect the monitor's UP port and your computer's USB port.

  • Page 9

    Note When connecting a device to the using a cable appropriate to the device. (For the purchase of the cable and external devices, ask the service center of the cor- responding product.) The company is not liable for problems or damages to an external device caused by using an unauthorized cable for the connection.

  • Page 10

    Installation Installing Your USB Monitor Note Make sure to connect the USB cable and begin the installation after your PC has booted. If you turn off your monitor or remove the USB cable while the installation is in progress, it may cause a problem with your PC and Windows OS.

  • Page 11

    Click "Install". Click "Finish" to complete the installation. When setup is finished, a monitor icon is created in the system tray at the bottom of the monitor screen, and the information for the installed USB monitor is displayed. When the installation is completed, configure the following settings to use multiple mon- itors.

  • Page 12

    Connections You can see the deactivated monitor No.2 (this may appear activated). Monitor No.2 is a virtual monitor which cannot actually be used. Therefore, first arrange the activated monitors in the order which they are actually used and move monitor No.2 to the last position.

  • Page 13

    Click the monitor icon to display a list of connected USB monitors. Example) The following figure shows when two USB monitors are connected. Select the monitor for which you want to configure the display settings. You can configure the "Screen Resolution" , "Color Quality" and "Screen Rotation" settings for your monitor. Checking the configuration After the installation, you can check the configuration by following these steps.

  • Page 14

    A list of the installed device will be displayed, as shown in the figure below. The Initial Screen Settings after Installing the Program Applicable mode: Extend mode Mode position: To the right of the primary screen Mode rotation: 0° USB Monitor - Limitation •...

  • Page 15

    Service Pack 4 or later: Supported Windows Server 2003: Not Supported Windows Vista: Supported. (64bit Not Supported) • To check the information on the operating system of your PC, right-click’My Computer’ on the ‘Windows Desktop’ and select ‘Properties’ from the displayed menu. Check the infor- mation in the ‘General’...

  • Page 16: Monitor Assembly

    Using the Stand Monitor Assembly Monitor and Bottom HAS Stand Attaching a Base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad. HAS Stand A. Stand Stopper...

  • Page 17

    Samsung is not liable for these kinds of accidents. • Samsung is not liable for product damage or personal injury when a non- VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.

  • Page 18: Troubleshooting

    Troubleshooting Self-Test Feature Check Note Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. Self-Test Feature Check Turn off both your computer and the monitor. Unplug the video cable from the back of the computer. Turn on the monitor.

  • Page 19: Useful Tips

    Useful Tips A monitor recreates visual signals received from the computer. Therefore, if there is a problem with the computer or the video card, this can cause the monitor to become blank, have poor coloring, become noisy, and video mode not supported, etc. In this case, first check the source of the problem, and then contact the Service Center or your dealer.

  • Page 20

    You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly. Adjust the maximum resolution and frequency that the monitor can handle properly. If the display exceeds SXGA or 75 Hz, a "Not Optimum Mode", "Recommended Mode 1680 x 1050 60 Hz"...

  • Page 21

    Have you adjusted the resolution or frequency to the monitor? Adjust the resolution and frequency at the video card. (Refer to the Preset Timing Modes). The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD.

  • Page 22

    There is no image on the screen. I cannot turn on the monitor. If you quickly and repeatedly turn your USB monitor off and on, it may not work normally. Your USB monitor is recognized as a general USB device on your PC. Therefore, please refer to the troubleshooting information for USB devices by visiting Microsoft’s customer support site.

  • Page 23

    Check whether your computer is in hibernation mode (The monitor turns off). Move your mouse or press any key to display the screen again. Check the following items if there is trouble with the monitor. Check if the power cord and the video cables are properly connected to the computer. Check if the computer beeps more than 3 times when booting.

  • Page 24

    2. Select ‘Samsung UbiSync Monitor’ from the list and click ‘Remove’. There is no response when I right-click “Samsung UbiSunc (P:) (USB Monitor)“ in the “My Computer“ window and click “Eject“ in the displayed menu. Though your USB monitor is recognized as a drive by your PC, it has been designed so that the context menu usually displayed when right-clicking on the “My Computer“...

  • Page 25

    Troubleshooting Note Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the In- formation section or contact your dealer.

This manual also for:

2243qwx

Comments to this Manuals

Symbols: 0
Latest comments: