Table of Contents
Advertisement
User's Manual
• After finishing work turn off the mouse with the power switch
position) . After this, you can pull out the receiver
and insert it into the mouse (Fig. 6). When using the receiver
it out from the mouse (Fig. 7) and connect it to the PC USB port again.
• Do not place the receiver into a confined metal space (table drawer, box,
safe), as a metal screen does not transmit radio signals.
• If the batteries run down, the mouse works in jerks. It means that the
batteries should be replaced with new ones, as it is shown in Fig. 4. Always
install only identical new batteries.
Fig. 6. Fitting the receiver
into the mouse case
Important
This device meets the highest standards of energy conservation.
Use the switch
it will help you extend the mouse battery life.
on the bottom of the mouse to switch it on/off –
RM-304 WIRELESS
from the PC USB port
Fig. 7. Extraction of the receiver
from the mouse case
Technical support: www.real-el.com
ENG
(the OFF
again, pull
5
Advertisement
Table of Contents
