Table of Contents
Advertisement
Manual Recording (Continued)
Manual Setting in Function Menu
You can use manual recording functions
easily by selecting items in the function
menus.
After performing "To Change to Manual
Recording Mode" (
1
FUNCTION
2
Select the desired menu.
For details on each menu, see below.
Select
Set
Menus
FOCUS
Adjusts the focus.
ADJUST BRIGHTNESS
Adjusts the brightness.
22
pg. 20)
FOCUS
ADJUST BRIGHTNESS
SHUTTER SPEED
WB
EFFECT
TELE MACRO
ADJUST BRIGHTNESS
AUTO
0
[AUTO] : The focus is adjusted automatically.
@ 9 : A : Adjusts the focus manually. Move the set lever to £ / ¤
to set the focus. (When zooming, the subject will not go out of
focus if you adjust the focus at the telephoto (T) side before
zooming to the wide-angle (W) side.)
!
For
mode
[AUTO] : The brightness is adjusted automatically.
–6 to +6 : Corrects the brightness within this range in increments
of 1. Move the set lever to ¡ / ¢ to set the value.
#
For
mode
[±0] : The brightness is not adjusted.
–2.0 to +2.0 (EV) : Corrects the brightness within this range in
increments of 1/3EV. Move the set lever to ¡ / ¢ to set the
value.
8 To lock the exposure
When the menu disappears after you fi nish confi guring the
setting, press and hold the set lever for more than 2 seconds.
C
The
indicator appears.
3
Select the desired setting.
Select
Set
Depending on the kind of settings you
select, you can set the value by moving the
set lever to ¡ / ¢ after selecting.
4
FUNCTION
The menu disappears and the indicator for
the set function appears.
8 To return to the previous screen
Move the set lever to £.
8 To exit the screen
Press FUNCTION.
Settings: [ ] = Factory-preset
ADJUST BRIGHTNESS
AUTO
0
16:9
2
Advertisement
Table of Contents
