D-Link AirPlus Xtreme G WUA-2340 Manual page 13

Using the Configuration Utility (continued)
Encryption:
You can see if WEP (Wired Equivalent Privacy) is Enabled or Disabled here.
Connection Info:
When the WUA-2340 is connected to a wireless network, Connected will be
displayed in this field.
Tx Rate:
The default setting is Auto; Tx Rate settings are automatically determined for
a maximum wireless signal rate of up to 54Mbps (108Mbps* in Turbo mode).
Channel:
The default setting is Auto. The channel selection is automatically determined
by the WUA-2340 .
Signal Quality:
Displays the signal strength and the link quality of the WUA-2340 s wireless
connection to the access point or router.
Packet Count:
Displays the statistics of the data packets that are transmitted and received.
Rescan Button:
Rescans for the strongest signal with the current SSID and associates with
that access point or router.
*Maximum wireless signal rate derived from 802.11g specifications. Actual data throughput
will vary. Network conditions and environmental factors lower actual data throughput rate.
14