Brinkmann 810-1456-S Owner's Manual page 22

Choose a good, cleared assembly
area and get a friend to help you
put your grill together. Lay
card board down to protect grill
finish and assembly area.
CAUTION: Some parts may contain
sharp edges. Wear
protective gloves if
necessary.
Step 1
Attach cart base to side panels.
Insert four M6 X 10 mm bolts
through cart base and into legs
and tighten securely. Be sure the
door hinge holes face forward.
Step 2
Attach back panel to left and right
leg of cart assembly using six
M6 X 10 mm bolts.
Step 3
Attach the tank block bar to the
bottom cart base and the back
panel using two M6 X 10 mm
bolts.
21
Door Hinge Holes