Infrastructure Mode - D-Link DW-590 User Manual

Infrastructure Mode

This section defines the process of configuring an D-Link DWL-A520
Wireless Network Adapter in infrastructure mode. See Section "Device
Configuration" beginning on page 2-16 for detailed descriptions of each
option in the Network Configuration Settings.
1. Under the "General" tab, make sure the "Locally Administered Address"
checkbox is unchecked. Use the following information as a guideline to
choose the values of each field in the configuration window:
−
−
−
−
−
Configuration Name: This field identifies the configuration. This name
must be unique. Configuration names are case insensitive, for
example, "Infrastructure."
Network Name (SSID): This is the name of the IEEE 802.11a
wireless network, for example, "AP_Network." This field has a
maximum limit of 32 characters. If this field is left blank, the STA
connects to the AP with the best signal strength.
Network Connection: AP (Infrastructure).
Power Saving: This field allows the configuration of power
management options. The options are Off, Normal, and Maximum.
Turbo Mode: This field enables or disables D-Link turbo mode.
5-8