Table of Contents
Advertisement
Networking Basics (continued)
Assigning a Static IP Address in Windows XP/2000
Click on Internet
Protocol (TCP/IP)
Click Properties
In the screen below, please do
the following:
Input your IP address
and subnet mask. (The
IP addresses on your
network must be within
the same range. For
example, if one computer
has an IP address of
192.168.0.2, the other
computers should have IP
addresses that are
sequential, like
192.168.0.3 and
192.168.0.4. The subnet
mask must be the same
for all the computers on
the network.)
Input your DNS server
addresses. (Note: If you
are entering a DNS
server, you must enter
the IP address of the
Default Gateway.)
The DNS server information will be supplied
by your ISP (Internet Service Provider.)
Click OK
30
Advertisement
Table of Contents
