Wall Bracket Installation; To Mount The Product On The Wall Bracket - Samsung SyncMaster 320MX-3 User Manual

Wall Bracket Installation

• Contact a technician for installing the wall bracket.
• SAMSUNG Electronics is not responsible for any damages to the product or harm to
customers when the installation is done by the customer.
• This product is for installing on cement walls. The product may not stay in place when
installed on plaster or wood.
Components
Only use the components and accessories shipped with the product.
Wall Bracket(1)

To mount the product on the wall bracket

The shape of the product may vary depending on the model. (The assemblies of the plastic
hanger and the screw are the same)
1. Remove the 4 screws on the back of the product.
2. Insert the screw B into the plastic hanger.
Notice
• Mount the product on the wall bracket and make sure it is properly fixed to the left
and right plastic hangers.
• Be careful when installing the product on the bracket as fingers can be caught in the
holes.
Introduction
Hinge(Left 1, Right Plastic
1) Hanger
(4)
Screw Screw Anchor
(A)(11) (B)(4) (11)