Advertisement
Battery Installation and Precautions.
1. Installing the Battery
Place the projector over the battery and push it down pushing the back of the projector forward.
When the projector is connected to the battery, the screen is displayed automatically. Do not look directly at the lens
while connecting the battery.
2. Removing the Battery
Hold the rear part of the projector and lift it up sliding the latch on the back of the battery to the left (
3. Battery Use Time
Use Time: 2.5 Hours / Charge Time: 3 Hours
the bottom left of the battery. The green LEDs show the
remaining battery charge and are automatically turned off after a
while.
When the AC power is connected through the adapter and the
battery is being charged, the green LED lights up.
).
Advertisement
