Table of Contents
Advertisement
Quick Links
Universal Tool
™
General Safety Information & Replacement Parts
TABLE OF CONTENTS
General Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Air Compressor and Air Tool Safety . . . . . . . . . . . . . . . . . . . 2-3
Tool Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Maintenance / Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Service Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
WARNING: Risk of injury to persons. Read and
understand operation instructions. Always become familiar
with all the instructions and warnings before operating any
pneumatic tool.
Extended Cone Wheel Grinder
GRINDERS & CUT-OFF TOOLS
: This product contains lead, a chemical known to
WARNING
the State of California to cause cancer and birth defects or
other reproductive harm. Wash hands after handling.
: This product contains chemicals known to
WARNING
the State of California to cause cancer and birth defects or
other reproductive harm. Wash hands after handling.
FLORIDA-PNEUMATIC.COM
Please contact 1-800-356-3392 for further assistance.
UT4425E-CWS
Advertisement
Table of Contents
Related Manuals for Florida Pneumatic Universal Tool UT4425E-CWS
Summary of Contents for Florida Pneumatic Universal Tool UT4425E-CWS
- Page 1 UT4425E-CWS Universal Tool Extended Cone Wheel Grinder GRINDERS & CUT-OFF TOOLS ™ General Safety Information & Replacement Parts TABLE OF CONTENTS General Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 : This product contains lead, a chemical known to WARNING Air Compressor and Air Tool Safety .
- Page 2 Safety Information • If the pneumatic tool is used in a dust filled environment exhaust 7.2.2.3 GENERAL SAFETY RULES air can cause a dust hazard • Multiple hazards. Read and understand the safety instructions before • Dusts and fumes generated when using power tools can cause installing, operating, repairing, maintaining, changing accessories on, ill health (for example: cancer, birth defects, asthma and/or der- or working near the power tool. Failure to do so can result in serious matitis); risk assessment of these hazards and implementation of bodily injury. appropriate controls of is essential. • Only qualified and trained operators should install, adjust or use the • Risk assessment should include dust created by the use of the tool power tool. and the potential for disturbing existing dust. • Do not modify this power tool. Modifications may reduce the effec- • Operate and maintain the power tool as recommended in these tiveness of safety measures and increase the risks to the operator. instructions, to minimize dust or fume emissions • Do not discard the safety instructions – give them to the operator. • Direct the exhaust so as to minimized disturbance of dust in a dust • Do not use a tool if the tool has been damaged. filled environment • Warnings shall be given against the risk of explosion or fire due to the • Where dusts or fumes are created, the priority shall be to control material being processed;...
- Page 3 Safety Information (continued) AIR COMPRESSOR AND AIR TOOL SAFETY WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains 1. Risk of Bursting. Do not adjust the regulator to result in output chemicals known to cause cancer, birth defects or other pressure greater than the marked maximum pressure of this air reproductive harm.
- Page 4 Installation Cleaning the air hose □ A 3/8" air hose is required, with a maximum length of 25 ft. □ Clean the air hose of accumulated dust and moisture before connecting it to the air supply. NOTE: If a longer air hose is required, connect a 1/2" air hose to the 3/8"...
- Page 5 Operation Operating the grinder Installing the grinding stone □ This Grinder is designed to operate on 90 PSIG. Lower WARNING: Disconnect the tool from the air supply before pressure (below 90 PSIG) will reduce performance of servicing or changing accessories. the tool.
- Page 6 Troubleshooting Problem Possible Cause Solution □ Flush the tool with air tool oil or gum solvent. The tool runs slowly or will not There is grit or gum in the tool. operate. □ Lubricate the tool according to the lubrication The tool is out of oil.
- Page 7 Service Parts / Exploded View Drawing FLORIDA-PNEUMATIC.COM Please contact 1-800-356-3392 for further assistance.
- Page 8 Universal Tool ™ Questions, problems, missing parts? Call Customer Service 8 a.m.-5 p.m., EST, Monday-Friday 1-800-356-3392 FLORIDA-PNEUMATIC .COM Retain this manual for future use. Universal Tool a Division of Florida-Pneumatic Manufacturing Corporation 851 Jupiter Park Lane, Jupiter FL 33458...
Need help?
Do you have a question about the Universal Tool UT4425E-CWS and is the answer not in the manual?
Questions and answers