Connections; Connecting To A Tv With An Audio/Video Cables And Rf Cable - Samsung BD-E8300M User Manual

Connections

Connecting to a TV with an Audio/Video cables and Rf cable

1.
Connect the RF cable as shown.
2. Using video/audio cables, connect the VIDEO OUT (yellow) / AUDIO OUT (white and red)
terminals on the rear of the product to the VIDEO IN (yellow) / AUDIO IN (white and red) terminals
of your TV.
3.
Plug in the product and TV.
4.
Turn on the product and TV.
RF cable
| NOTE |
\ The RF cable connection of this product sends only signals of TV. You must connect the Audio/Video cables to watch output
from your product.
\ Noise may be generated if the audio cable is placed too close to the power cable.
\ If you want to connect to an AV receiver, please refer to the AV receiver connection pages. (See page 19)
\ The number and position of terminals may vary depending on your TV set. Please refer to the user manual of your TV.
\ If there is only one audio input terminal on the TV, connect it to the AUDIO OUT (Red/white) terminal of the product.
| CAUTION |
\ Do not connect the product to your TV through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
To ANT IN
To TV
To ANT INPUT
Red
R
White
W
Yellow
Y
Audio
Video
17
|
English