How Do I Power The System On - Raymarine E15024 User Manual

How do I power the system on?

POWER ON
Ensure that you autopilot and basestation is powered on at the ships
breaker. On the controller, press and hold the STANDBY button. The
handset will beep, the display will read STANDBY and you're ready to go.
Power Saving Mode
If you are in STANDBY mode (autopilot off), the handset will automatically
turn off if no button has been pressed for 5 minutes. This will help to extend
the battery life.
Wireless signal strength
Wireless signal strength (5 levels) is shown on the right hand side
of the display.
Keylock
When using your S100, you can temporarily lock the autopilot
keys to ensure that it is not accidentally operated.
How do I activate the keylock?
Press and hold the mode button until you see the key symbol and "LOCK"
message.
Note: You cannot activate keylock when the autopilot is in control of your
boat.
How do I turn off the keylock?
Press mode followed by the PILOT button. A "KEYLOCK OFF" message
will be displayed.
User Guide 7