WARNING Do not use with combustible or explosive material. Do not expose to water or rain. Connect only to grounded outlet with GFCI device. Disconnect power for cleaning and servicing. This equipment to be operated only by trained personnel. CONFORMS TO UL STD 507 CERTIFIED TO CAN/CSA STD C22.2 NO.
The OmniAire 1000V is a compact, lightweight air scrubber with variable airflow. It is used for removal of toxic mold, containment area asbestos and lead dust during renovation and abatement projects, and for purifying air in commercial, factory sites and medical facilities.
Speed Control The air flow can be regulated from 300 to 900 cfm by using the HIGH/VARIABLE speed selector switch and the SPEED CONTROL knob. Start the Machine To start the machine in high speed, set the rocker switch HIGH/VARIABLE speed to the HIGH position. In this position the SPEED CONTROL is disabled.
Page 5
The machine just hums when turned on 1. Unplug the unit. 2. Remove the HEPA filter and push the blower wheel by hand. If it does not move freely or if you hear a grinding/ scrapping noise as you spin it, then the blower wheel is touching the side of the blower housing. This may be due to an impact of some kind and the motor mounts have been bent.
Omnitec Design LIMITED WARRANTY Omnitec Design warrants, for a period of twelve (12) LIMITATIONS OF WARRANTY months from the date of purchase, that all Products, THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY AND ALL component parts and accessories, excluding filters, OTHER WARRANTIES AND OBLIGATIONS OF Omnitec will be free from defects in material and workmanship Design OR ITS SUPPLIERS, EXPRESS OR IMPLIED,...