Table of Contents
Advertisement
If a menu option or function is not supported by the Voice Control function, we suggest trying the
✎
Motion control function. To use the Motion control, raise your hand while opening it toward the
screen, hold it for a moment and then wave it 3–4 time to the left and right. Motion control starts. If
the Motion control starts, the cursor is displayed at the center of the screen and the Motion guide
bar size is at the bottom of the screen.
■ Voice Control
Turns the Voice Control function on or off.
The
VOICE˜
✎
■ Language
Select the recognition language you want to use.
■ Trigger words
You can select the Trigger Words that start the Voice Control function. Alternatively you can turn on
your TV using the Trigger Words if Voice Control function is set to On.
If the Trigger Words is set to Hi TV, say Hi TV Power On.
If the Trigger Words is set to Smart TV, say Smart TV Power On.
■ Voice command bar size
Set the Voice command bar size mode to Minimum or Full.
Minimum displays the least number of words and phrases you can use.
Full displays all the words and phrases.
■ Voice Sensitivity
Set the sensitivity of Voice recognition.
− Howling: Set echo level.
− Recognition responsiveness: Set the responsiveness level of Voice recognition.
■ Voice Control Environment Test
You can test the noise level on the TV microphone.
− Noise Test: This test checks the noise level of the TV microphone. Select Next using your remote.
The test will start and should only take a few seconds. Please keep as quiet as possible during the
test.
− Mic & Speaker Test: This test checks the noise level of the TV microphone and speaker. Select
Start using your remote. The test will start and should only take a few seconds. Please keep as
quiet as possible during the test.
Available only when Speaker Select is set to TV Speaker.
✎
− Voice Control Test: This test checks the volume level and clarity of your voice when using Voice
Control. Select Start using your remote. The test will start. Please say a guide message as loud
and clearly as you can to complete this test.
If the test is not completed, select Retest, and then say a guide message loudly and clearly
✎
again.
To use the Voice Control function, follow these steps:
If Voice Control function is set to On, the TV may be turned on automatically by effect of the ambient
✎
environment.
1. Speak the Trigger words that you selected using the microphone embedded in the TV or press and
hold the
VOICE˜
If you use the Voice Control, the volume will be set to 5 automatically.
✎
2. Speak a word or phrase listed in the Voice Control Environment Test. If you use the
on your remote, release the button.
Pronounce the word or phrase clearly and correctly in the language you selected in Language.
✎
3. Wait until recognition is complete, and then speak the next command.
To exit the Voice Control mode, speak a Trigger words or "Cancel" using the TV's microphone,
✎
or press the
[PE8000-XU]BN68-04062J.indb 19
button on your remote is always activated.
button on your remote. The TV displays the Voice Control Environment Test.
VOICE˜
button on your remote again.
English - 19
VOICE˜
button
2012-04-03
5:29:06
Advertisement
Table of Contents
