Philips Saeco Intuita HD8750 User Manual page 38

ENGLISH
36
3 Remove the "INTENZA+" water fi lter from the water tank if it was instal-
led.
4 Remove the water tank and pour the entire content of the Saeco decal-
cifi er. Then fi ll the water tank with fresh water up to the MAX level.
5 Place the water tank back into the machine.
6 Place a large container (1.5L) under both the steam/hot water wand
and the dispensing spout.
7 Press and hold the "
fl ashing, release it to start the cycle. The "
the whole descaling cycle.
Note:
If you press the " " button by mistake, press the "
8 The machine starts dispensing the descaling solution through the
steam/hot water wand (the "
spout (the " " button fl ashes).
" for 3 seconds. When the button starts
" button fl ashes during
" button fl ashes) and the dispensing
" button to quit.