Sony SS-DV2D Service Manual page 20

HCD-DV2D
www.freeservicemanuals.info
2-3-2. VFD Test MENU
1. Select the menu "VDF Test Menu" and press the ENTER "R"
button, then execute this mode.
2. When the check is completed with success, "OK" appears.
When the check finds any failure, "fail" appears..
VFD Test
Status ... ok
3. To exit the Test Mode, press the O RETURN "R" button.
2-3-3. IR Remote Test
1. Select the menu "IR Remote Test" and press the ENTER "R"
button, then execute this mode.
2. Press TAPE N , x , > , . button on the remote
commander in this order.
3. When the check is completed with success, "OK" appears.
When the check finds any failure, "FAIL" appears.
IR Remote Test
... ok
PLAY
... ok
Stop
... ok
Next
Prev
... ok
4. To exit the Test Mode, press the O RETURN "R" button.
3. Version Information
1. Select the menu "Version Information" and press the
ENTER "R" button, then execute this mode.
2. The "Version" appears.
Version Information
MPEG Version
3. To exit the Test Mode, press the O RETURN "R" button.
18
: XXX.XX.XX.XX.X
Published in Heiloo Holland
07/11/2016