Table of Contents
Advertisement
Controlling the Keyboard Sounds
Layering Two Tones
You can use the following procedure to layer two different
tones (such as piano and strings) so they sound
simultaneously when you press a keyboard key.
1.
Select the first tone you want to use.
bp
Press
(TONE) and then use
tone you want.
Example: 038 ELEC.PIANO 1
E . P i a n o 1
2.
cs
Press
.
br
3.
Use
(10-key) to select the second tone you
want.
Example: 238 STRINGS 1
S t r i n
4.
Play something on the keyboard.
Both tones sound at the same time.
5.
cs
Pressing
again to unlayer the keyboard (so
it plays only the tone you selected in step 1).
cs
• Each press of
toggles between layered (two tones)
and unlayered (one tone).
EN-14
br
(10-key) to select the
Lights
s 1
g
Splitting the Keyboard between
Two Different Tones
You can use the procedure below to assign different tones to
the right range and left range of the keyboard, so it sounds
like you are playing an ensemble between two instruments.
To select the two tones for a split keyboard
1.
Select the tone for the right side range (page
EN-13).
bp
Press
(TONE) and then use
tone you want.
Example: 365 FLUTE 1
F l u t e
2.
cr
Press
.
Lights
br
3.
Use
(10-key) to select the left side range
tone you want.
Example: 074 VIBRAPHONE 1
V i b e s
4.
Play something on the keyboard.
This will sound the tones assigned to the left and right
side ranges of the keyboard.
VIBRAPHONE 1
Split point
F3
br
(10-key) to select the
1
1
FLUTE 1
Advertisement
Table of Contents
