To Change The Octaves Of The Duet Keyboards; Layering Two Tones - Casio CELVIANO GP-400 User Manual

Playing with Different Tones
To change the octaves of the duet
keyboards
You can change the ranges of the left and right
keyboards in octave units from their initial default
settings.
1.
Press the SETTING button to display the
setting screen.
2.
Use the q and w arrow buttons to select
"Duet" and then press the ENTER button.
3.
Use the q and w arrow buttons to select a
keyboard range.
• Upper Octave: Right-side keyboard
Lower Octave: Left-side keyboard
L o w e r O c t a v e
4.
Use the u (–) and i (+) arrow buttons to
change the octave.
• +1 or higher: Raises the octave by the specified value.
–1 or lower: Lowers the octave by the specified value.
0: Returns the octave to its original setting.
• The setting range is –2 to +2.
• Example: To select "Lower Octave" in step 3 and set
"+1" in step 4
Left keyboard
C4 C5 C6
1 octave higher than initial
setting
5.
Press the SETTING button to exit the setting
screen.
EN-18
Right keyboard
C7 C3 C4 C5
Unchanged

Layering Two Tones

Use the following procedure to layer two tones, so they
sound at the same time.
1.
Press the LAYER button.
2.
Use the u and i arrow buttons to display
"LAYER".
3.
Select the main tone.
• Use the q and w arrow buttons to select "U1"
(Upper 1) and then press the ENTER button.
U 1
4.
Select a tone and then press the ENTER
button.
• See "Selecting and Playing a Tone" on page EN-10 for
information about how to select a tone.
C6
5.
Select the layered tone.
• Use the q and w arrow buttons to select "U2"
(Upper 2) and then press the ENTER button.
U 2
6.
Select a tone and then press the ENTER
button.
7.
Press a keyboard key.
• Both tones sound at the same time.