Cycle Option Buttons - LG WTR24DHM Owner's Manual

CYCLE OPTION BUTTONS

Your washing machine features several additional
cycle options to customize cycles to meet your
individual needs. Certain option buttons also
feature a special function that can be activated by
pressing.
NOTE: : To protect your garments, not every wash,
rinse, spin, water, or option is available with every
cycle. See the Cycle Guide for details.
STEAM
Adding the Steam option to
a wash cycle helps provide
superior cleaning performance.
By using hot steam, the fabrics
will get the cleaning benefits of a very hot
wash.
WARNING
y Do not touch the lid during steam cycles.
The lid surface can become very hot. Al-
low the lid lock to release before opening
the door.
y Do not attempt to override the lid lock
mechanism or reach into the washer dur-
ing a steam cycle. Steam can cause severe
burns.
NOTE:
y The steam option cannot be used with all
cycles.
y Steam may not be clearly visible during the
steam cycles. This is normal. Too much steam
could damage clothing.
y Do not use steam with delicate fabrics such
as wool, silk, or easily discolored fabrics.
SOAK
Allows the consumer to remove
stains more thoroughly by
specifying additional time for the
clothing to soak during washing.
At the end of SOAK, the wash cycle will be
started without drain.
• It is possible to select soaking time 15, 30,
45, 60, 120, 180 minutes by pressing the
SOAK button repeatedly.
• It is normal that washer do weak agitation
during SOAK cycle.
H O W TO U S E
STRONG WAVE
• During washing, when you want to
adjust the water power, use these
buttons.
• Initially, since normal
water power, it will not be displayed.
HOT & COLD WASH
• When you select HOT & COLD,
Use these buttons.
• Basically, COLD is selected.
• If you wish to add HOT, you press
the HOT button. At the same time,
HOT & COLD LED light.
• Just to select HOT, COLD is off by pressing
COLD button.
• While operating, you can change it.
• In the DELICATES course, Just COLD will be
selected.
(If HOT is used, Laundry may be damaged.)
• In the STAIN CARE, ALLERGY CARE, SMART
RINSE, TUB CLEAN course, HOT & COLD will
be selected at the same time.
TIME DELAY
Once you have selected the cycle
and other settings, press this button
to delay the start of the wash cycle.
Each press of the button increase the
delay time, up to 3-18 hours.
TURBO WASH™
Adding the Turbo Wash™ option
reduces the cycle time while still
providing similar wash performance to
the same cycle without Turbo Wash.
NOTE:
y The Turbo Wash™ option cannot be used with all
cycles.
21