Table of Contents
Advertisement
MMS
8
Before you start to use MMS, you have to subscribe to both GPRS
and MMS services provided by your operator. Then you have to
adjust MMS settings in your phone to be able to use MMS.
Because MMS uses your operator's MMS server on a GPRS network
to send messages to phones, you need to adjust the following
settings correctly in order to use MMS:
Go to menu: Oper.Service > WAP Service > WAP Setting to create a
new WAP profile for your network settings. See page 97, "WAP Settings"
for details about how to set up a WAP profile.
Go to menu: Message > MMS > Settings > Server Info to select the MMS
server for sending and receiving MMS messages.
8
You should contact your operator for details on MMS settings. Some
operators may adjust the settings for you after you subscribe to MMS.
Editing and Sending MMS Messages
Go to menu: MMS
new MMS message.
1. Fill in below fields required for sending a MMS message.
• To : Press
may enter a phone number or press
recipients from the list of contacts in the Phone Book. Follow the
steps below:
a. Press
b. Press
54
Using Your Phone
>
New , and follow the steps below to write and send
to enter a recipient's phone number editor. You
to scroll to the name of contact, and then
press
to select it. Repeat the step to select multiple
contacts.
(Done) to return to the recipient's phone
number editor.
(Browse) to select
Advertisement
Table of Contents
