Preparation; Charging - Panasonic RP-HTX90NEW Operating Instructions Manual

Digital wireless stereo headphones
Table of Contents

Advertisement

Charging

The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit.
Connect this unit to a computer using the
USB charging cord.
A : Power/pairing LED
B : USB charging cord (supplied)
• Check the direction of the terminals and plug in/out
straight holding onto the plug. (It may result in
malfunction by the deforming of the terminal if it is
plugged in obliquely or in wrong direction.)
C : Computer
• Turn on the computer in advance.
• The power/pairing LED lights in red when charging is in
progress. When charging is completed, the power/
pairing LED will go out.
• It takes approx. 4 hours to charge the battery from
empty to full.
Note
• Charge in a room temperature between 10 oC and 35 oC. Outside of this temperature range, charging may stop and
the power/pairing LED may go out.
• It is not possible to turn the power on or connect to Bluetooth
cancelling function cannot be used.
• Do not use any other USB charging cords except the supplied one. Doing so may cause malfunction.
• Charging may not be performed or may stop if the computer is in or switched to standby or sleep mode.

Preparation

C
®
devices during charging. In addition, the noise
8
Right (R) side
B
A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rp-htx90nRp-htx90nekRp-htx90nea

Table of Contents