Electrolux EUF3047AOW User Manual page 41

WARNING!
Reposition, level the appliance,
wait for at least four hours and then
connect it to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The edges of the doors run parallel to
the side edge of the appliance.
• The magnetic seal adheres to the cabi-
net.
• The door opens and closes correctly.
WARNING!
If the ambient temperature is cold
(i.e. in Winter), the gasket may not
fit perfectly to the cabinet. In that
case, wait for the natural fitting of
the gasket.
• Remove the covers on the handles care-
fully with a small screwdriver.
• Unscrew the handle.
• On the opposite side remove the hole
covers by driving a 3-4 mm drift or drill
into them.
• Install the handle.
• Install the covers on the handle.
• Install the hole covers provided within the
accessory bag.
• Put the cabinet in position.
ENGLISH 41