Samsung 55LS03 E-Manual page 133

The problem
The picture is distorted.
The colour is wrong or
missing.
The colour is poor or the
picture is not bright enough.
There is a dotted line on the
edge of the screen.
The picture is black and
white.
"
If the test picture does not appear or there is noise or distortion, the TV may have a problem. Contact Samsung's Call Centre
for assistance.
" If the test picture is displayed properly, there may be a problem with an external device. Please check the connections.
" If the problem persists, check the signal strength or refer to the external device's user manual.
The compression of video content may cause picture distortions, especially in fast moving
pictures from sports programmes and action movies.
If the signal reception is weak or poor, screen distortion may be visible but it is not a
malfunction.
Mobile phones used close to the TV (within 1 m) may cause noise on analogue and digital
channels.
If you're using a Component connection, make sure that the Component cables are
connected to the correct jacks. Incorrect or loose connections may cause colour problems or
a blank screen.
Go to Picture and then adjust the
● Settings
●
Settings
●
Settings
● Settings
See if Energy Saving Mode
● Settings
Try resetting the picture.
●
Settings
Change Picture Size to 16:9
● Settings
If you are using AV or analogue equipment, disconnect the adapter from the Component
(Blue) input port on the TV and connect it to the AV (Yellow) input port.
" The Component or AV input port may not be provided depending on the model or
geographical area.
Check whether Greyscale
● Settings
Try this!
Picture Mode, Brightness, Sharpness, and
Picture Picture Mode
Picture Expert Settings
Picture Expert Settings
Picture Expert Settings
has been enabled.
General Eco Solution
Picture Expert Settings
Standard.
Picture Picture Size Settings
is set to On.
General Accessibility
- 133 -
Colour
Brightness
Sharpness
Colour
Energy Saving Mode
Reset Picture
Picture Size 16:9 Standard
Greyscale
settings.