Operation With Dvd And Video Cd; Playing A Dvd And Video Cd; General Features; Moving To Another Title - LG DV378 Owner's Manual

Operation with DVD and Video CD

Playing a DVD and Video CD

Playback Setup
DVD
Turn on the TV and select the video input source con-
nected to the DVD player.
Audio system: Turn on the audio system and select
the input source connected to the DVD player.
Press OPEN/CLOSE to open the disc tray.
1 1
Load your chosen disc in the tray, with the
2 2
playback side down.
Press OPEN/CLOSE to close the tray.
3 3
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which offer a menu.
DVD
Use the 1 1 2 2 3 3 4 4 buttons to select the title/chapter you
want to view, then press SELECT/ENTER to start play-
back.
Press TITLE or MENU to return to the menu screen.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You also may set PBC to Off under setup. See page
13.
Notes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
"Parental Control", on page 14).
– DVDs may have a region code.
Your player will not play discs that have a region code
different from your player. The region code for this
player is 5 (five).
VCD2.0 VCD1.1

General Features

Note
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.

Moving to another TITLE

1 /3
When a disc has more than one title, you can move to
another title as follows:
Press DISPLAY, then press the appropriate num-
bered button (0-9) to select a title number.

Moving to another CHAPTER/TRACK

1 /12
DVD VCD1.1
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
Press SKIP/SCAN . or > briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, press 3 3 /4 4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
Note
For two-digit numbers, press the numbered buttons
(0-9)in rapid succession.

Search

VCD2.0
DVD
1 Press and hold SKIP/SCAN . or > for about
two seconds during playback.
The player will now go into SEARCH mode.
2 Press and hold SKIP/SCAN . or > repeatedly
to select the required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
3 To exit SEARCH mode, press PLAY.
DVD
1 /3
VCD1.1
15