Download Print this page

Borg & Overstrom ProCore C2 User Manual

Tap systems

Advertisement

Quick Links

User Guide
C2/C3 Tap systems
Dispense Options
Chilled
Ambient
Contents
Component/Feature Overview
Operation
Functions & Controls
General Safety
CO2 Bottle Installation
Sparkling
NOTE: This booklet to be left with
appliance following installation

Advertisement

loading

Summary of Contents for Borg & Overstrom ProCore C2

  • Page 1 User Guide C2/C3 Tap systems Dispense Options Chilled Ambient Sparkling Contents Component/Feature Overview Operation Functions & Controls General Safety CO2 Bottle Installation NOTE: This booklet to be left with appliance following installation...
  • Page 2 Component/ Feature Overview c2/c3 Tap - Major Components Dispense Lever Contents: 1 no Tap Tower 2/3 no Tap Spacers 2/3 no Tap Lever sets 1 no Dispense Label Set 1 no Tap Nut Chilled Water Tap 1 no Mounting Gasket Ambient Water Tap Sparkling Water Tap Main Body...
  • Page 3 ProCore™ Undercounter - Major Components Contents: 1 no ProCore+ Unit 1 no 2.0m Power Cord Set 1 no Co2 Regulator with Gauge & Connection tube* 1 no Ventilation Ducting Kit Water Inlet Top Cover CO2 Inlet Ambient Dispense Sparkling Dispense Chilled Dispense Unit Carry Handle On/Off Switch...
  • Page 4 Front Panel Ventilation Chimney Easy-fit Ventilation Base...
  • Page 5: Functions And Controls

    Functions & Controls Tap Operation Chilled Water Tap Ambient Water Sparkling Water Tap* Dispensing from unit: Pull and hold the dispense lever towards you and release to finish dispense Use the valves on the sides of the taps to CLOSED increase or decrease flow rate.
  • Page 6: General Safety

    General Safety General Safety - Always place the dispenser in its vertical position, on a surface which can capably support its weight. - During use this machine must remain in its upright position. - Adequate ventilation must be allowed for - we recommend using the supplied ventilation ducting kit.
  • Page 7 CO2 Bottle Installation - Sparkling Versions Only Unpack CO2 Regulator and fit Attach the regulator to the Connect the assembled CO2 elbow fitting to spigot outlet. disposable CO2 bottle, ensuring bottle and regulator to the CO2 the pressure relief vent is facing inlet using a ¼”...
  • Page 8 For full distributor service manual visit: www.borgandoverstrom.com/manual/c2-c3 Customer services: aftersales@borgandoverstrom.com call +44 1362 695 006 © Copyright Borg & Overström. This guide is printed by Borg & Overström and shall not be reproduced or copied in anyway. Ref: 701716 Version: V.18012022...

This manual is also suitable for:

Procore c3