Advertisement
CO2 Bottle Installation - Sparkling Versions Only
1
Unpack CO2 Regulator and fit
elbow fitting to spigot outlet.
4
Stand the cylinder in a suitable
place.
7
Allow the machine to stand for
8 - 12 minutes for the initial chilling
process to complete.
2
Attach the regulator to the
disposable CO2 bottle, ensuring
the pressure relief vent is facing
away from you. Ensure the
regulator is closed.
5
We recommend between 3.5 - 4
bar (58 PSI) (max). Do not exceed
4 bar pressure.
10
mins
OFF
3
Connect the assembled CO2
bottle and regulator to the CO2
inlet using a ¼" pipe.
6
58 PSI
It is necessary to prime the
sparkling system - pull the sparkling
handle for a few seconds until
CO2 is coming through. Check
and adjust the CO2 pressure
accordingly.
Advertisement
