Electrolux ERN31600 User Manual page 36

36 www.electrolux.com
Ha
Hc
8 mm
Hb
Hb
Push the part (Hc) on the part (Ha).
Open the appliance door and the kitchen
furniture door at an angle of 90°.
Insert the small square (Hb) into guide (Ha).
Put together the appliance door and the
furniture door and mark the holes.
Remove the small squares and drill holes
with ø 2 mm at 8 mm from the outer edge
of the door.
Place the small square on the guide again
and fix it with the screws supplied.
Ha
Align the kitchen furniture door and the ap-
pliance door by adjusting the part (Hb).