Table of Contents
Advertisement
3.3
Installation Steps
NOTE!
Before installing the digital detection module, connect the cables between the
module and a face recognition access control terminal/face recognition terminal by
referring to section "Device Wiring" and sections related to the wiring in the quick
guide of the face recognition access control terminal/face recognition terminal.
1 Wall mount
The figure below shows the process of installing the digital detection module on a
wall when the module is to be used in combination with a face recognition access
control terminal.
2 Standing pole mount
The figure below shows the process of installing the digital detection module on a
standing pole when the module is to be used in combination with a face recognition
access control terminal.
6
Advertisement
Table of Contents
