Table of Contents
Advertisement
Operation
EZ Scan (Channel Search)
EZ Scan (Channel Search)
- Automatically finds all channels available through the antenna and cable sources, and stores them in memory on the channel list.
- Run EZ Scan again after any Antenna/Cable connection change.
SETUP
VIDEO
AUDIO
TIME
OPTION
LOCK
1. Press the menu button and then use
2. Press the
G
button and then use
G
3. Press the
button and then use
• Analog/DTV Air:
Watching Over-the-air, cable, and digital over-the-air signals via antenna 1 input jack.
• Analog/DTV Cable:
Watching Over-the-air, cable, and digital cable signals via antenna 1 input jack.
• Analog+DTV Air (ANT2):
Watching Over-the-air, and cable signal via antenna 1 input port and the digital over-the-air signal via the antenna 2 input jack.
• Analog/DTV Cable (ANT2):
Watching Over-the-air, and cable signal via antenna 1 input port and the digital cable signal via the antenna 2 input jack.
* Cable Service Band Note: Select Std=Standard, HRC=HRC Band, or IRC=IRC Band.
(For further band information, contact your cable service provider.)
4. Press the enter button to begin the channel search.
Allow EZ Scan to complete the channel search cycle for TV, CATV, and DTV/CADTV.
14 Projection TV
Select antenna input,
press
Prev.
MENU
D / E
button to select the
button to select
D / E
D / E
button to select antenna input (Based on your connections to antenna 1-2).
menu.
.
Advertisement
Table of Contents
