Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BDI AES-403
Summary of Contents for BDI AES-403
- Page 1 Broadcast Devices, Inc. AES-403 Multi Switcher Digital/Analog* Input Audio Switcher/DA/Digital to Analog Converter Technical Reference Manual Broadcast Devices, Inc. Tel. (914) 737-5032 Fax. (914) 736-6916 World Wide Web: www.Broadcast-Devices.com Rev A. 03/14...
-
Page 2: Table Of Contents
Table of Contents Introduction I. Unpacking II. Installation and Connections III. Features and Operation IV. Initial Operating Setup AES-403 Optional Programming Functions 5-6 Remote Control Connections Serial Interface V. Specifications VI. Warranty... -
Page 3: Introduction
Select a space in suitable E.I.A. standard rack to locate the unit. Determine the local electrical power supply voltage. As supplied from the factory, your AES-403 is setup for 100 – 240 V.A.C. 50 - 60 Hz. No external adjustment for local power standards is necessary if power available conforms to the above rating. -
Page 4: Features And Operation
The unit features a front panel headphone output and volume control for easy confidence monitoring. The AES-403 can be used as a totally automatic switcher sensing loss of clock or any error displayed on the front panel to command the switcher to select the alternate feed. -
Page 5: Aes-403 Optional Programming Functions
When a digital input is selected the sample rate indication will be that which is input on the selected digital input. The AES-403 supports any sample rate between 32 and 192 KHz for digital I/O. The AES-403 supports 32, 44.1 or 48 KHz for analog inputs which are configured upon initial installation. - Page 6 AES-403 Front Panel DIP Switch Programming Guide of Operation Table 1. S1-1 OFF = Front Panel Button Disables A/B and AUTO/MAN Buttons - Factory Default – ON...
- Page 7 AES-403 Main PC Board DIP SWITCH SW1 SETTINGS DIPSWITCH1 1-4 ADC Sample Rate 32 KHZ 44.1 KHZ 48 KHZ INPUT B DIPSWITCH1-8 ANALOG...
- Page 8 Remote Control – Parallel/GPIO DB9F Connection Table 2. Pin 1 +5 VDC @100mA. Pin 2 Auto Mode Select Pin 3 Select B Input Pin 4 Select A Input Pin 5 Error Reset Pin 6 Status Common Pin 7 Status – “B” Selected Pin 8 Status - “A”...
-
Page 9: Remote Control Connections
Specifications Digital Inputs: One or Two – XLR configuration dependent Analog Input: One - configurable Digital Outputs: Two – XLR Analog Output: Balanced L/R XLR + 4 dBm 600 Ohms – Rear Panel Headphone out: 600 Ohm unbalanced - Front Panel Sample Rate Range: 8 –... -
Page 10: Vi. Warranty
Email: Customer.service@broadcast-devices.com VI. Warranty VI. Warranty Broadcast Devices, Inc. products are warranted against failure due to faulty materials or workmanship Broadcast Devices, Inc. products are warranted against failure due to faulty materials or workmanship for a period of one year from the date of shipment from Broadcast Devices, Inc. dock. The warranty for a period of one year from the date of shipment from Broadcast Devices, Inc.
Need help?
Do you have a question about the AES-403 and is the answer not in the manual?
Questions and answers