I. Introduction The 8/16 Switcher series are an 8 or 16 input, 2 by 1 passive switchers. The 8/16 series are capable of accepting up to two or four sets of balanced inputs and switching them to a single or dual set of up to 8 outputs.
(factory default), the 8/16 can be configured to default to the last channel selected upon power up or can be configured to default to the A position upon power up. Factory default is for the 8/16 to remember last channel selected upon power up. If it is desired for the unit to always default to position A upon power up remove the top cover and locate JP3 on the main PC board.
Warranty Broadcast Devices, Inc. products are warranted against failure due to faulty materials or workmanship for a period of one year from the date of shipment to the ultimate user. The warranty covers repair or replacement of defective parts at the factory, provided the unit has been returned prepaid by the user.
Need help?
Do you have a question about the 8/16 and is the answer not in the manual?
Questions and answers