Installing Under Windows 2000; Figure 6 - Windows 2000 Found New Hardware Prompt - Advantech B+B SmartWorx ESU2-100 User Manual

Installing under Windows 2000

Step Procedure
Step 1 Turn on the power to your computer

system.
Step 2 Plug the wide flat end of the USB cable

into the downstream connector.
Step 3 Plug the square end of the USB cable into

the back of the USB-to-Serial adapter.
Figure 6 illustrates the
Windows 2000 Found new
hardware prompt. The Found
New Hardware Wizard
launches automatically when
you first plug in the USB-to-
Serial adapter.
Step Procedure
Step 4 Click the Next button.

USB
Follow these steps to install the USB-to-Serial adapter under
Windows 2000.

Figure 6 - Windows 2000 Found new hardware prompt

9
to Serial Adapter
Description
This is the system in which the device is to
be installed.
This is the connector located on the back of
the computer of USB hub.
Windows tells you that it has found new
hardware and launches the Add New
Hardware Wizard. The Found new
hardware prompt displays.
Description
The Search for or display drivers
prompt displays.