Table of Contents
Advertisement
•
[Off] – Disable digital output.
•
[PCM Only] – Downmix to two-channel
audio format.
•
[LPCM Output] – Select the LPCM (Linear
Pulse Code Modulation) output sampling rate.
•
[48kHZ] – For discs recorded at
sampling rate of 48 kHz.
•
[96kHZ] – For discs recorded at
sampling rate of 96 kHz.
Note
•
[LPCM Output] setting is only available if the [Digital
Output] is set to [PCM Only].
•
The higher the sampling rate, the better the sound
quality.
[Volume]
Set the default volume level when you play a disc.
1. Press OK.
2. Press
to set the volume.
3. Press OK to confi rm and exit.
[Sound Mode]
Select a preset sound effect to enhance the audio
output.
•
[3D] – Select a virtual surround sound effect
that is produced from the left and right audio
channels.
•
[Movie Mode] – Select a sound effect for
movies.
•
[Music Mode] – Select a sound effect for
music.
[CD Upsampling]
For better sound quality in stereo mode, convert
the music CD to a higher sampling rate.
•
[Off] – Turn off CD-upsampling.
•
[88.2kHz] – Convert to twice the original
sampling rate.
•
[176.4kHz] – Convert to four times the
original sampling rate.
[Night Mode]
Make loud sound level softer and soft sound level
louder so that you can watch the DVD movies at a
low volume, without disturbing others.
•
[On] – Enjoy quiet viewing at night.
•
[Off] – Enjoy surround sound with a full
dynamic range.
Note
•
Applicable only to Dolby Digital encoded DVDs.
Video setup
1
Press SETUP.
» [General Setup] menu is displayed.
2
Press
to select [Video Setup], and then
press
to enter the submenu.
3
Select an option, and then press OK.
4
Select a setting, and then press OK.
•
To return to the previous menu, press
BACK.
•
To exit the menu, press
[TV System]
Change this setting if the video does not appear
correctly. By default, this setting matches the most
common setting for TVs in your country.
•
[PAL] – For a PAL-system TV.
•
[Multi] – For TV that is compatible with both
PAL and NTSC.
•
[NTSC] – For an NTSC-system TV.
[TV Display]
Select a display format:
•
[4:3 Pan Scan] – For a 4:3 screen TV: full-
height display with the trimmed sides.
•
[4:3 Letter Box] – For a 4:3 screen TV: wide-
screen display with black bars on the top and
bottom of the screen.
•
[16:9] – For a wide-screen TV: display ratio
16:9.
[Progressive]
If a progressive scan TV is connected to this
product, turn on the progressive scan mode.
•
[On] – Turn on progressive scan.
•
[Off] – Turn off progressive scan mode.
SETUP.
EN
15
Advertisement
Table of Contents
