Table of Contents
Advertisement
08. Brightness (Command2:h)
G To adjust screen brightness.
You can also adjust brightness in the picture menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to 'Real data mapping1'. See page 29.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
09. Color (Command2:i)
G To adjust the screen color.
You can also adjust color in the picture menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to 'Real data mapping1'. See page 29.
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
10. Tint (Command2:j)
G To adjust the screen tint.
You can also adjust tint in the picture menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64
* Refer to 'Real data mapping1'. See page 29.
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
11. Sharpness (Command2:k)
G To adjust the screen sharpness.
You can also adjust sharpness in the picture menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to 'Real data mapping1'. See page 29.
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
12. OSD Select (Command2:l)
G To select OSD (On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0 : OSD off
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
13. Remote Control Lock Mode (Command2:m)
G To lock the front panel controls on the monitor and remote
control.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0 : Lock off
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
* If you're not using the remote control, use this mode.
When main power is on/off, remote control lock is released.
14. PIP / Twin (DW) (Command2:n)
G To control the PIP (Picture In picture).
You can also control the PIP/TWIN using the PIP or Twin
picture button on the remote control or in the screen menu.
Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data 0: PIP/DW off
1: PIP (S)
2: DW1
Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
15. PIP Sound Select (Command2:p)
G To select main or sub sound for PIP.
You can also adjust main or sub sound for PIP using PIP
SOUND button on the remote control or in the screen
menu.
Transmission
[k][p][ ][Set ID][ ][Data][Cr]
Data 0: Main image sound
1: Sub image sound
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
1 : OSD on
1 : Lock on
3: DW2
4: PIP (L)
27
Advertisement
Table of Contents
