Table of Contents
Advertisement
Light status
The ready light is orange
RR-70W
1
Wi-Fi light
2
Wi-Fi AP light
3
battery light
4
Error status light
5
Ready light
Condition/solution
Check the following:
• Make sure there are no originals jammed in the scanner.
• Make sure the scanner is connected to your computer securely.
• If a firmware update fails and the scanner enters recovery mode,
update the firmware again using a USB connection.
• Disconnect and re-connect the USB cable to the computer. If this
does not solve the problem, the scanner may be malfunctioning or
the light source in the scanner unit may need to be replaced. Contact
Epson for support.
72
Advertisement
Table of Contents
