Table of Contents
Advertisement
Connecting the Display
Using the Computer
1.
Place the monitor in a convenient, well-ventilated location near your computer.
2.
Connect the signal cable. When attached, tighten the thumbscrews to secure the
connection.
3.
Connect the power cord into a proper power outlet that is easily accessible and close to
the display.
Power Cord
NOTE
This is a simplified representation
of the rear view.
This rear view represents a
general model; your display may
differ from the view as shown.
4.
Press
When monitor power is turned on, the 'Self Image Setting
Function' is executed automatically.
(Only Analog Mode)
NOTE
' Self Image Setting Function'? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push
the 'AUTO/SET' button on the front panel of the monitor. Otherwise, you may execute the ' Factory reset' option on
the OSD adjustment menu. However, be aware that this option initializes all the menu items except 'Language'.
1
2
Signal Cable
Analog signal
D-sub
Varies according to model.
PC-outlet type
PC
PC
MAC
button on the front switch panel to turn the power on.
Digital signal
DVI(Optional)
Wall-outlet type
2
DVI-D(This feature is not available in all countries.)
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to change
the 15 pin high density (3 row) D-sub VGA connector on the supplied
cable to a 15 pin 2 row connector.
A6
1
Advertisement
Table of Contents
