Operations; How To Set The Appliance For Surface Cooking - Samsung NZ30K6330RG User Manual

Operations

How to set the appliance for surface cooking

CAUTION
• The surface elements may be hot even when off and burns can occur. Do not
touch the surface elements until they have cooled down sufficiently.
• At high or medium-high settings, never leave food unattended. Boilovers cause
smoking and greasy spillovers may catch on fire.
• Be sure you turn the control knob to OFF when you finish cooking.
Single surface unit control knob (left rear, left front, right rear)
2
1
NZ30K6330R_DG68-00821A-03_EN+MES+CFR.indb 17
1. Push the knob in.
2. Turn in either direction to the setting
you want.
• At both the Off and High settings,
the knob clicks into position.
Dual surface unit control knob (center, right front)
The dual surface unit features an inner and outer element. You can select 1 or 2
elements (Single or Dual) depending on the size of the pot or pan you are using.
[ ] indicates the single power zone, and [ ] indicates dual power.
1. Push the knob in.
2. Turn in either direction to the setting
2
1
NOTE
If you remove the knobs for cleaning, make sure to re-attach them in the correct
orientation. (Refer to the illustrations on the previous page.)
CAUTION
• Please note: The operation of a control knob may not synchronize with the
actual operation of the radiant element if there is a problem with the cooktop.
• The area on the knob between the high and off settings is not appropriate for
cooking.
you want.
• To use the single surface unit, turn
the control knob to the [ ] single
element setting.
• To use the Dual surface unit, turn the
control knob to the [ ] dual element
setting.
English 17
2018-03-09 12:03:17