Page 34
Warning! Safety Instructions • Ventilation - Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. - Do not install the product on a carpet or cushion. - Do not block or cover the product with cloth or other materials while unit is plugged in.
Page 35
• Use only an authorized attachments / accessories approved by type of air freshener, insecticide, lubricants, wax (car, industrial), LG Electronics. Otherwise, this may result in fire, electric shock, abrasive, thinner, benzene, alcohol etc., which can damage the malfunction, or product damage.
Preparing Separate Purchase Separate purchase items can be changed or modified for quality • If the TV is turned on for the first time after it was shipped from the improvement without any notification. Contact your dealer to buy these factory, initialization of the TV may take a few minutes.
Lifting and moving the TV Wall Mounting Bracket Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in Please note the following advice to prevent the TV from being scratched the following table.
Attaching the TV to a Desk • Avoid touching the screen at all times, as this may result in damage to the screen. (Depending on model) • Do not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the The TV should be attached to a desk so it cannot be pulled in a forward/ TV may occur.
We recommend the use the TV and a table. of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices.
Page 40
• When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects. (Depending on model) Stand hole (Depending on model) • Do not use a sharp object when you detached the cable cover.
Connections Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Connect various external devices to the TV and switch input modes to Some separate cable is not provided. select an external device.
External Speakers External Devices Available external devices are: Blu-ray player, HD receivers, DVD players, (Depending on model) VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. • The external device connection may differ from the model. •...
Page 43
Network Method of volume control port (Depending on model) (Depending on model) • Cable Spec. Wired network connection This TV can be connected to a Pro:Centric server via the port. After Each up/down pins making the physical connection, the TV needs to be set up for network are connected to CPU communication.
Using Button Basic functions Power On (Press) Power Off (Press and Hold) (Depending on model) Menu Control (Press You can simply operate the TV functions, using the button. Menu Selection (Press and Hold 1 All running apps will close. 2 You can access and adjust the menu by pressing the button when TV is on.
Adjusting the Angle of the TV to suit view (Depending on model) Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20˚ 20˚ • When adjusting the angle of the product, watch out for your fingers.
Page 46
* To use the button, press and hold for more than 3 seconds. • Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak. (Power) Turns the TV on or off. • Failure to match the correct polarities of the battery may Adjusts the brightness of the cause the battery to burst or leak, resulting in fire, personal screen to reduce energy consumption.
Troubleshooting Abnormal display • If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product. The software version can be updated for improvement in performance. •...
Specifications • The annual energy consumption indicated on the energy label is measured in accordance with IEC 62087 and the Hong Kong Energy Efficiency Labelling Scheme (MEELS). • The actual energy consumption depends on the usage environment (the content watched, TV settings, etc.). Broadcasting Specifications Digital TV Analogue TV...
Page 49
HDMI-DTV supported mode HDMI-PC supported Mode • PC audio is not supported. Horizontal Vertical Resolution • Use HDMI IN 1 for PC mode. (Depending on model) Frequency (kHz) Frequency (Hz) 31.46 59.94 Horizontal Vertical 640 x 480p Resolution 31.5 Frequency (kHz) Frequency (Hz) 31.47 59.94...
• Some HEVC encoded ULTRA HD videos other than the content VC-1 Advanced Profile (except for Video officially provided by LG Electronics may not be played. WMVA), VC-1 Simple and Main Profiles .asf • Some codecs can be supported after a software upgrade.
• Only using furniture that can safely support the television set. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such • Ensuring the television set is not overhanging the edge of the as the cost of media, shipping, and handling) upon email request to supporting furniture.
EXTERNAL CONTROL Phone jack Type DEVICE SETUP (Depending on model) • You need to purchase the phone-jack to RS-232C cable required for the connection between the PC and the TV, which is specified in the manual. RS-232C Setup * For other models, connect to the USB port. •...
RS-232C Configurations Set ID For Set ID number, see "Real data mapping". 7-Wire Configurations 1 Press to access the main menus. (Standard RS-232C cable) 2 Press the Navigation buttons to scroll to [Support] and press 3 Press the Navigation buttons to scroll to [Set ID] and press 4 Scroll left or right to select a set ID number and press The adjustment range is 1-99.
Command Reference List Transmission / Receiving Protocol (Depending on model) (Depending on Model) Data Transmission Command1 Command2 (Hexadecimal) (Command1)(Command2)( )([Set ID])( )([Data])(Cr) 1 Power 00 to 01 (Command1) : First command to control the TV. (j, k, m or x) 2 [Aspect Ratio] (See p.
Page 57
1 Power (Command: k a) 3 Screen Mute (Command: k d) ►To control Power On/Off of the set. ►To select screen mute on/off. Transmission Transmission (k)(a)( )([Set ID])( )([Data])(Cr) (k)(d)( )([Set ID])( )([Data])(Cr) [Data] 00 : [Off] [Data] 00 : Screen mute off (Picture on) / Video mute off [Data] 01 : [On] [Data] 01 : Screen mute on (Picture off) [Data] 10 : Video mute on...
Page 58
6 [Contrast] (Command: k g) 9 [Tint] (Command: k j) ►To adjust screen contrast. ►To adjust the screen tint. You can also adjust contrast in the picture settings. You can also adjust tint in the picture settings. Transmission Transmission (k)(g)( )([Set ID])( )([Data])(Cr) (k)(j)( )([Set ID])( )([Data])(Cr) [Data] Min : 00 to Max : 64 [Data] Red : 00 to Green : 64...
Page 59
12 Remote Control Lock Mode (Command: k m) 15 [Energy Saving] (Command: j q) ►To lock the front panel controls on the monitor and remote control. ►To reduce the power consumption of the TV. You can also adjust Energy Saving in picture settings. Transmission Transmission (k)(m)( )([Set ID])( )([Data])(Cr)
Page 60
17 [Equalizer] (Command : j v) 18 Tune Command (Command: m a) ►To adjust equalizer. ►Select channel to following physical number. Transmission Transmission (j)(v)( )([Set ID])( )([Data])(Cr) (m)(a)( )([Set ID])( )([Data] 00)( )([Data] 01)( )([Data] 02)(Cr) [Data] 00 : High channel data [Data] 01 : Low channel data ex.
Page 61
19 Programme [Skip] / [Add] (Command: m b) 22 [Input] select (Command: x b) (Main Picture Input) ►To set skip status for the current Programme. ►To select input source for main picture. Transmission Transmission (m)(b)( )([Set ID])( )([Data])(Cr) (x)(b)( )([Set ID])( )([Data])(Cr) [Data] 00 : [Skip] [Data] Structure...
Page 63
If not use the remote-controller with data formats recommended, IR output signals will be suppressed automatically by IR receiver. In this case, LG does not guarantee IR working function. To make sure of this matter, here are two methods as below.
Page 64
The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. Model Serial no.