Loopcomm LP-9094 User Manual

High Power AC WiFi Adapter PCI-E Card
1
Install Adapter
2
Insert the Setup CD
3 3
Follow the Instructions for your Operating System
Windows 8,7, and Vista Windows XP
LP-9094
High
Power
AC
WiFi

Adapter

PCI-E
Card
USER GUIDE
DRIVER
lNSTALLATION
EXIT
WWW.LOOPCOMM.COM WIRELESS WORKING
B
4
Loopcomm_Wireless
5
LP-9094
HI-POWER
WIFI

ADAPTER

PCI-E
Card
LP-9094
High
Power
AC
WiFi

Adapter

PCI-E
Card
Install the Adapter
Power off your PC and open the case to find an
available PCI-E slot.
Insert the Adapter into the available LP-9094 slot
and close the lid.
Attach the Antennas
Locate the Antenna Stand and fasten the two
antennas onto the antenna connectors.
Attach the antenna cable to the antenna connectors
on the Adapter (located on the back of your PC).
If you choose not to use the antenna stand, you
may also attach the antennas directly to the ant-
enna connectors on the Adapter.
Power on your Desktop PC
a
Insert the Setup CD
b
Note: Windows XP Users
A Found New Hardware Wizard
when your PC has powered on. Click
the window and continue with the installation in Step 3
below.
READ FIRST
USER'S Guide 1.0.0
prompt will appear
Cancel to close