Settings
•
Flow rate must be set before adjusting or running your ionizer.
•
Set flow rate no higher than 2.5 liters per minute. Anything higher
could cause internal damage.
•
When adjusting the settings, the buttons must be pressed
quickly as failure to do so will result in booting you out of the
program menu.
•
The unit must be dispensing water before pressing the buttons.
•
Adjust the flow rate (LPM) by slowing down the water flow to
ionizer from the source water:
- Cold Water Connect (for under undercounter units)
- Faucet Diverter ( for countertop units)
•
SEE PAGE 14 FOR COUNTER TOP INSTALLATION INSTRUCTIONS
SEE PAGE 16 FOR UNDER COUNTER INSTALLATION INSTRUCTIONS
Ionizer Care
•
Do not twist top of faucet. This will damage the faucet.
•
We recommend internal filters and pre-filters be changed
annually.
•
Citric acid cleaning filter should be used 3 to 4 times
per year.
•
Use cold water only with your ionizer
LifeIonizers.com/support
11
LIFE MXL-11 C/UC