Canon GX6000 Series Online Manual page 156

3. Select Transport mode.
4. Confirm the message, then select Yes.
The mode is shifted to the transfer mode.
When it is completed, the power is turned off automatically.
5. Check that ON lamp is off and
Important
• Do not unplug the printer while the ON lamp is lit or flashing, as it may cause malfunction or
damage to the printer, making the printer unable to print.
6. Close the paper output tray.
7. Retract paper support, then close the rear tray cover.
8. Unplug the printer cable from the computer and from the printer, then unplug the power
cord from the printer.
9. Use adhesive tape to secure all the covers on the printer to keep them from opening during
transportation. Then pack the printer in the plastic bag.
Close and seal the opening of the bag with an object such as tape so as not to leak ink.
10. Attach the protective material to the printer when packing the printer in the box.
Important
• Carry the printer as shown in the illustration below. If you hold the cassette when carrying, the cassette
may come off from the printer.
unplug power cord.
156