Kia MTXM100YPPE User Manual page 54

Trouble shooting
Problem
Vibration is occurring from where the
The sound or image
conversion switch has been installed.
quality is low.
Image colour/tone quality is low.
USB memory is damaged.
USB memory has been contaminated.
A separately purchased USB HUB is being
used.
A USB extension cable is being used.
The USB does not work
A USB which is not a Metal Cover Type
USB Memory is being used.
An HDD type, CF, SD Memory is being
used.
There are no music files which can be
played.
There are no titles which can be played.
The iPod® is not rec- The iPod® firmware version has not been
ognised even though it properly updated.
has been connected
The iPod® device does not recognise
downloads.
54
Possible Cause
The sound may be short circuited and the image distorted if the device vibrates.
The device will return to normal once vibrations stop.
Please use after formatting the USB into FAT 12/16/32 format.
Remove any foreign substances on the contact surface of the USB memory and multimedia
terminal.
Directly connect the USB memory with the multimedia terminal on the vehicle.
Directly connect the USB memory with the multimedia terminal on the vehicle.
Use standard USB Memory.
Use standard USB Memory.
Only MP3, WMA file formats are supported. Please use only the supported music file for-
mats.
Use iTunes to download and save MP3 files into the iPod®.
Use iTunes to update the firmware version and reconnect the iPod® with the device.
Reset the iPod® and reconnect with the device.
Countermeasure