Table of Contents
Advertisement
44
Operating
Changing subtitle Code Page
y
If the subtitle is displayed in broken letter, you can
change the subtitle code page to view the subtitle
file properly.
1. During playback, press INFO/MENU (m).
2. Select an [Option] using a/d, and press
Wheel (
).
3. Use w/s to select the [Code Page] option.
4. Use a/d to select desired code option.
4
5. Press BACK (1) to exit the On-Screen display.
Changing the Picture Mode
eroy
You can change the [Picture mode] option during
playback.
1. During playback, press INFO/MENU (m).
2. Select an [Option] using a/d, and press
Wheel (
).
3. Use w/s to select the [Picture Mode] option.
4. Use a/d to select desired option.
5. Press BACK (1) to exit the On-Screen display.
Setting the [User setting] option
1. During playback, press INFO/MENU (m).
2. Select an [Option] using a/d, and press
Wheel (
).
3. Use w/s to select the [Picture Mode] option.
4. Use a/d to select the [User setting] option,
and press Wheel (
).
5. Use w/s/a/d to adjust the [Picture Mode]
options.
Select [Default] option then press Wheel (
reset the all video adjustments.
6. Use w/s/a/d to select the [Close] option,
and press Wheel (
) to finish setting.
Viewing content information
y
The player can display the content information.
1. Select a file using w/s/a/d.
2. Press INFO/MENU (m) to display the option
menu.
The file information appears on the screen.
,
Note
The information displayed on the screen
may not correct comparing actual content
information.
) to
Advertisement
Table of Contents
