Sitecom X4 N300 User Manual page 31

When you finish, click „Save‟ to save the settings made and restart the router so the
settings will take effect after it reboots.
Wireless WPS
Wi-Fi Protected Setup (WPS) is the simplest way to establish a connection between the
wireless clients and the wireless router. You don‟t have to select the encryption mode
and fill in a long encryption passphrase every time when you try to setup a wireless
connection. You only need to press a button on both wireless client and wireless router,
and WPS will do the rest for you.
SSID: This is the network broadcast name (SSID) of the router.
Use WPS: Check the box to enable WPS function and uncheck it to disable the WPS
function.
Push Button: Press the button to start the WPS process. The router will wait for the
WPS request from the wireless devices within 2 minutes.
Input PIN Number: You can fill-in the PIN code of the wireless device and press the
button to start the WPS process. The router will wait for the WPS request from the
wireless device within 2 minutes.