MAKING CONNECTIONS
Make sure to use the supplied cable. Otherwise, this may cause the device to malfunction. Some of the cables are not provided.
CAUTION
•
Do not press the screen for a prolonged time. This may cause image distortion.
•
Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a screensaver if possible.
•
The plugs of the cable may become hot during operation. Do not touch the plug for a long time.
NOTE
When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power outlet.
•
•
The monitor may flicker when turned on in an area where the temperature is low. This is normal.
•
Sometimes red, green, or blue spots may appear on the screen. This is normal.
Connecting to a host
This monitor supports the *Plug and Play feature.
•
* Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure anything or install
any manual drivers.
Thunderbolt
3 connection
TM
Please connect a Thunderbolt
NOTE
PD (Power Delivery) is supported via Thunderbolt
•
•
Features may not work properly depending on the connected device's specifications and the environment.
•
Thunderbolt
3 port is not for the Monitor Power source but for a PC power source.
TM
Connect the Power cord to supply power to the Monitor.
Connecting to USB Device
Power Delivery 5 V/1.5 A is supported via the USB-C expansion port.
NOTE
Peripheral devices are sold separately.
•
3 host.
TM
3 port.
TM
USB
USB
23