Table of Contents
Advertisement
26
SPECIFICATIONS
SPECIFICATIONS
22MB35PH
Display
Screen Type
Pixel Pitch
Sync Input
Horizontal Frequency
Vertical Frequency
Input Form
Video Input
Signal Input
Input Form
Resolution
Max
Recommend
Plug & Play
DDC 2B(Analog,Digital,HDMI)
Power
On Mode : 19.6 W Typ. ( Outgoing condition ) *
Consumption
Sleep Mode ≤ 0.3 W **
Off Mode ≤ 0.3 W
Power Input
AC 100-240 V~ 50/60 Hz 1.0 A
Dimensions
With Stand
(Width x Height x
Without Stand
Depth)
Weight
4.1 kg
Tilt Range
-5° to 20°
Environmental
Operating Temperature
conditions
Operating Humidity
Storage Temperature
Storage Humidity
Stand Base
Attached (
Power cord
Wall-outlet type
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum
resolution).
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes)
Flat Panel Active matrix-TFT LCD
Anti-Glare coating
0.24825(H)mm x 0.24825(V)mm
30 kHz to 83 kHz (Automatic)
56Hz to 75Hz (D-SUB,DVI-D)
56Hz to 61Hz (HDMI)
Separate Sync. Digital
15 pin D-SUB Connector/DVI-D Connector(Digital)
HDMI Connector
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
D-SUB(Analog) : 1920 x 1080 @ 60 Hz
DVI/HDMI (Digital) : 1920 x 1080 @ 60 Hz
VESA 1920 x 1080 @ 60 Hz
509 mm x 353 mm x 224 mm
509 mm x 304 mm x 144 mm
10°C to 35 °C
10 % to 80 %
-20°C to 60 °C
5 % to 90 % non-Condensing
), Detached (O)
Advertisement
Table of Contents
