Inner Rails; Installing The Inner Rails - Supero Supermicro SSE-X3348S User Manual

Note: Your switch may differ from the illustrations in this manual
2-2

Inner Rails

Installing the Inner Rails

Installing the Inner Rails on the Switch
1. Place one of the inner rails on one side of the switch aligning the hook on the
side of the switch with the mounting hole in the rail. Make sure the inner rail
faces outward, as illustrated above.
2. Slide the inner rail forward so that the rail fits securely into the hook on the
side of the switch.
3. Secure the inner rail to the switch with one screw as illustrated above.
4. Repeat steps 1-2 for the remaining inner rail.
Figure 2-2: Installing the Inner Rail
2-3
Chapter 2 Rack Installation
1
2
1
3