Table of Contents
Advertisement
Chapter 2 Rack Installation
Chapter 2
Rack Installation
2-1
Rack Mounting Instructions
This chapter provides information on installing the switch into a rack unit with the
CSE-PT52L rail kit. There are a variety of rack units on the market, which may mean
the assembly procedure will differ slightly. You should also refer to the installation
instructions that came with the rack unit you are using.
NOTE: This rail will fit a rack between 26" and 33.5" deep.
Identifying the Sections of the Rack Rails
The CSE-PT52L rail kit package includes two rack rail assemblies in the rack
mounting kit. Each assembly consists of two sections: a fixed inner rail that secures
directly to the side of the switch, and a fixed outer rail that secures directly to the
rack itself.
Inner Rail Extension
(Discard)
Inner Rail
Outer Rail Rear Bracket
Outer Rail Front Bracket
Figure 2-1: Identifying the Sections of the Rack Rails
2-1
Advertisement
Table of Contents
